A special highly concentrated phosphorescent pigment is matched with our PLA/PHA compound, so it’ll print just like our other PLA/PHA 3D printing filaments.

Brands Tested

  • ColorFabb

  • Amolen

GlowFill

A special highly concentrated phosphorescent pigment is matched with our PLA/PHA compound, so it’ll print just like our other PLA/PHA 3D printing filaments. When you print it, with regular lights on or during the day, it is a very nice, creamy filament with a very smooth finish. Nice as it is, it changes when the lights go out. Then you will see it glow.

Surface Quality

++++

Strength

++++

Ease of Use

++++

Settings

Speed

(mm/sec)

40-100

Fan

(%)

40-100

ExtruderTemp

(Deg C)

195°C-220°C

Bed Temp

(Deg C)

0-60°C

Retraction

(mm)

0.75

Additional Recommendations

Very abrasive on the nozzle.
Print at 205°C with fan on starting the third layer at 40%.
Does not need heated bed.
Ensure a good first layer.

Get In Touch

info@gcreate.com

1.718.852.8418

Company
Resources

gMax Resources

Contact Support

gMax Forum

gCreate Terms of Use + Warranty

rocket_cutout_small.png